




Extraction hood in a galvanized desingn. Standard and customized.
Extraction hood in a galvanized design
Hood with edge extraction
Do you have problems with smoke and fumes, and it is not possible to use an extraction arm?
Then a hood in galvanized construction could be the right solution. Geovent can make customized or standard versions. They are available with different kinds of suspension, depending on the installation – on a wall or the ceiling. The airflow can be adapted for the individual purpose by adjusting the width of the slit as well as the diameter of the connection to the Spiro pipe.
Ordering table
Art No | Description |
---|---|
12-243 | Extraction hood for windscreen gluing 850×600 mm – Prepared for quick-coupling ø160 mm |
12-243A | Extraction hood for windscreen gluing 850×600 mm – Prepared for quick-coupling ø200 mm |
Accessories
Art No | Description |
---|---|
02-215 | Light kit consisting of 4 lights, 7 watt per bulb, 24V, incl electronic transformer |
02-216 | Light kit consisting of 8 lights, 7 watt per bulb, 24V, incl electronic transformer |
Hood in modules
These hoods have LED spotlights. The standard slit measures 20 mm. The slit can be made in different measurements on request. As shown in the picture below, the hoods can be installed in series, making an almost endless length of the actual hood possible.
Ordering table
Art No | Description |
---|---|
02-212 | Hood 1275x700x250mm with LED spots |
02-213 | Hood 2550x700x250mm with LED spots |
Hood with 1-joint extension arm and motorized hoist
When using a hood is the right solution, it may require flexibility in terms of placement. In these situations it is possible to place the hood on an extension arm.
By swinging the extension arm with the hood, it can be placed just above the extraction point.
In some cases, there is a need to raise and lower the hood. For this purpose, a motorized hoist with a migration from 600 to 1,000 mm is available. The motorized hoist comes with a remote control.
The hood comes in 3 sizes.
Receive newsletter
Inspiration
GEOVENT A/S is also able to deliver customized solutions.
Below we show a selection of installation examples where we have found a solution for the customer.

Cutting a wire: Fume and metal chips must be removed!
When a wire is cut, fume is generated and fine metal chips come from the process. In cooperation with our customer, JS Ventilation, we have

Exhaust gas extraction at Finkl’s Motorrad GmbH
As early as 2020, the decision was made at Finkl’s Erlebnis Motorrad GmbH in Augsburg to move into a new building. Finkl’s represents a total

Geovent provides special solution for emergency vehicles
How to effectively remove exhaust gas from fire engines with special exhaust pipes? While needing a flexible solution that disconnects the system from the fire

Welding extraction at sea
It’s perfect to get ideas for solutions on Geovent’s website and get the final advice from a competent sales team”, says Steen Lassen from Lassen

Vestas: Your problem is our problem
Vestas is a large well-known and worldwide company known for its high quality wind turbines. Over the years, we have supplied several project to Vestas

UN 17 Sustainable Development Goals
The wish for a healthier working environment has increased over time, and it has spread all over the World. For decades Governmental bodies In the

Fast Delivery
We offer the best delivery time in the industry!
We appreciate when customers order goods well in advance – but we also understand, that is can be difficult. Therefore, we want to be part of the solution.
Our priority is to have a relatively large stock, because we know that it creates value for our customers. Therefore, we always have a wide range of extraction arms, hose reels, filters and other components for ventilation and extraction systems in stock.
Delivery of standard products with short notice we see as a part of the optimal service for you.
We keep focus on servicing our customers
We have considerable experience in solving even the most complex special tasks.
We believe in long term relationships with Partners, distributors and end customers. We believe in a constructive cooperation, where we literally do what we can to help each other!
We have a wide range of standard products, which we combine to an efficient and competitive solution for you. If necessary, however, we are ready to use our long term experience to develop a special solution to your exact need.
Please feel free to contact us with any inquiry you may have.


Competent guidance is your guarantee for feeling secure
We have considerable experience in solving even the most complex special tasks.
If you cannot find what you are looking for on our website, we can probably help you develop the solution.
Contact us and let us talk about the opportunities