Variant - GT-600
The whirling effect of the airflow is made by means of an injection fan. This fan injects a vertical airflow through some nozzles on the rear edge of the hood, which means that air is drawn into the hood in its full width - away from the operator's breathing zone. A fan at the top of the hood undertakes the extraction. The extracted air has to be lead into the open.
Variant - GT-900
The Tornado hood has been designed for use in paint shops or in places where injurious vapours occur. The Tornado hood - which has been shown to the Danish Maritime Authority - meets the demands for local extraction on board Danish ships. A U-manometer is fitted on the Tornado hood for control of correct airflow.
Extraction panel SK
The Geovent extraction panel SK is very suitable for the extraction of vapours from cleaning vessels. Delivered complete with U-manometer / flow sensors for control of correct flow. Can be delivered with appropriate EEX fan - Widths: 500/700 mm - 700/1100 mm and 1100/1900 mm
Engine room / repair shop - grinding
Extraction set for grinding dust, max. 1200 m³/h including fan, protective circuit switch, orifice gauge, ø160 mm, with liquid level manometer for indication of operation as well as zone dust filter with manual cleaning system. Connect to ø160 mm duct.
Engine room – oil mist – injection needles
Extraction set (recirculation) for oil mist - max. 200 m³/h, including fan, orifice gauge, ø100 mm, with liquid level manometer for indication of operation as well as oil mist filter ø100 mm with option for discharge of the condensed oil.
Portable fan PM-180
This portable fan is suitable for the extraction of welding fumes, vapours etc., in places and rooms where a stationary ventilation system cannot be installed. Furthermore, it can be used for the extraction from - or as air supply unit for cargo areas, containers etc. The weight of the portable fan is only 19.3 kg. - We deliver this fan complete, ready-to-use with 2 x 5 m ø125 mm hose and aluminum funnel with 3 magnets.
We offer the best delivery time in the industry!
There are many reasons why, it is not always possible to order goods well in advance. We are aware of this and want to be part of the solution.
Our priority is to have a relatively large stock, because we know that it creates value for our customers. Therefore, we always have a wide range of Extraction arms, hose reels, filters and other components for ventilation and extraction systems in stock.
Often we can deliver with short notice. For us this is good service, but measure us at your next order!
We know – it sounds like a worn out saying, but, we honestly believe in this - so let us prove it!
We believe in long term relation in all of the value chain. We believe in good cooperation, which is based on… well, cooperation, in the strict literal meaning of the word!
We have a wide range of standard products, why we in most cases, by combining these, can offer a strong competitive solution. If it happens, that we do not have suitable standard components, we are not afraid of lifting the task, and use our know-how to help solve the problem at hand - just as long as it is within our area of competence of extraction and ventilation. In most cases we can help, please feel free to contact us.
At Geovent, we have considerable experience in solving even the most complex special tasks.
If you cannot find what you're looking for on the website, we can probably help you solve your need for extraction and ventilation anyway.
Contact us and let us talk about the possibilities